Maintenance shutdowns cost real money

Cement Grinding Machine

This equipment is the special grinding equipment for the cement-lining layer of DI pipe. After lining the in wall of DI pipe, the cement surface maybe rugged or have impurities or laitance layer, this will affect the internal surface quality of pipe and its use. Therefore, the cement-lining surface needs for grinding and for achieving the improvement of the cement lining smoothness of the in wall of DI pipe as well as decrease the resistance coefficient for water feeding.

The equipment arranges double grinding heads, i.e. has two internal cement grinding machines, and they grind from socket direction and spigot direction respectively for increasing productivity. In order to dust-proof during grinding, circulating water is required to avoid dust and remove the grinding heat of grinding wheel. The sewage produced from grinding will be discharged through special barrel-drain.

Natural stone grinder

The stone grinder MJSG is especially suited for use as a stone grinder in the production of whole grain products – primarily from wheat and rye. The stone grinder can be employed on its own or in combination with roller mill grinding. Another main area of application is the dehulling of pulses like lentils and peas as well as buckwheat.

FLEX electronics feature soft start, RPM presetting, RPM cruise control, overload protection and heat sensitive temperature sensors to prevent overheating in extreme workloads. All FLEX electric power tools feature spring loaded FLEX Longlife™ carbon brushes. When the brushes start to wear down, a tension spring is released pushing the brushes away from the armature, resulting in an overall life of the product. In the case of excessive load, the tension spring will be completely released, stopping the machine from overheating.

Mineral Grinding equipment

Maintenance shutdowns cost real money. In mineral concentrators, grinding mill relining defines maintenance shutdown duration. In other words, mill relining is critical. For over 20 years RME has focused on minimising relining time and maximising relining safety. Our original goal, halving pre-RME mill relining times, has been easily met. Our new target is halving our own times to just 25% of pre-RME mill relining system times. This has been achieved by precisely fitting ever-larger liners and safely mechanising every aspect of the mill relining process.

Precious has a well equipped drawing and design department which finalizes the drawings with high standards of efficiency, performance and safety as well. The purchase of all critical material are done with standard manufacturers and suppliers with double check and a testing certificate is being obtained wherever it is necessary. The production of all the machines are carried out under the strict supervision of qualified engineers. All the machines are being tested at the test banch. Before sending it to painting. The painting is done only after proper surface preparation and applying a coat of good quality primer, so that paint may with stand for a longer period. Epoxy (p.u.) paint may also be applied based on the requirement and surrounding operational conditions.